Wall Pet Door

The Wall Model is available in 11 standard sizes or we can make you a custom size door. Please see our sizes page for more information if you need help in choosing the proper size. Please choose a size from the drop down box. The dimensions listed next to each size are for the passage opening the pet would use.  For rough opening and tip to tip frame dimensions, see our sizes page. If you need a custom size door, please see our custom models information page.  NOTE: picture shows door models.

Our Wall Model comes standard with double flaps for improved insulation and energy efficiency. In some situations (i.e. installing in an interior wall) you may choose to install a single flap model.  If you do choose a single flap, it will be installed on the exterior frame of your pet door.

Pet Door Frame Colors Available.

Arizona Beige -- hard  coat paint, looks like coffee with a couple of creamers added.

Brushed Aluminum -- anodized metal, satin nickel color, looks like the bottom of a Coke can

Dark Bronze -- anodized metal, chocolate brown,  looks almost black in dimmer light

White -- white hard coat paint

Click on image to see a larger version.

The security cover comes standard on our models as an interior top load version. On occasion there will be an obstruction above the pet door that prevents the security cover from being raised up far enough to remove. In those instances, we provide an optional side load model.  The picture at the left shows a right side load door model and a top load door model with the covers partially inserted for visibility of the load direction.

We offer four color choices for our pet door covers.  Our standard covers are made of opaque, textured King Starboard® and each of the four available colors are designed to complement the four frame colors.   

The covers are designed to coordinate as follows:

Occasionally, our customers have also requested an additional exterior security cover be added to the standard wall model. This option is also available.  This is generally used if you need to be able to lock the pet door from the outside without access to the house (i.e. a worker comes into your yard and needs to temporarily lock the pet inside) or to prevent a pet from chewing on the flaps while locked out or to prevent a pet from running into the interior cover if you have them temporarily locked out.

Keep in mind that load direction is determined by looking at the door. If you want both covers to load from the same side of the door, you would need to order one as "left side load" and the other as "right side load".  Also remember if you plan on using the optional raincap, you must specify a side load direction for the exterior cover.

The raincap is part of Hale's water containment and diversion system to help prevent moisture intrusion into your pet door.  This awning like attachment hooks onto the top edge of the outside frame and helps protect from water intrusion into the pet door itself and therefore into your house.  The raincaps are available in our four standard frame colors and will be supplied to match the exterior pet door frame.

Our Wall Model comes with a standard 10" tunnel to fit walls between 2" and 10" in size. We offer an optional oversize 16" tunnel for deeper walls. If you need a tunnel longer than 16", please see our custom models information page.

All Hale Wall Model pet doors come with mold and mildew resistant olefin nylon carpet that covers the sides and bottom between the pet door flaps.  This prevents the tunnel from getting too hot or cold for the pet to walk on and prevents light and heat from being reflected into the house.  It can also help keep your house cleaner as it tends to clean the pet's paws as they walk on it.  It is easily cleaned with a vacuum cleaner hose and can be spot cleaned with any commercial carpet spot cleaner.

It is available in three varieties:  a slightly higher pile carpet in a medium brown color -- similar to a living room type carpet (shown at right in picture) and a lower pile (no pile), indoor/outdoor type carpet in both dark gray and dark brown (shown at left and center of picture).

Some pets initially resist pushing through the regular pet door flaps so we offer a flexible training flap as an optional add-on.  The training flap is made of a similar material to our regular flap but it has no strikes and has been vertically slashed several times to make it very easy to push through.  It does not, however, provide the energy efficiency of our regular flap.  Therefore, once an animal has gotten used to the training flap, the standard flaps should be re-installed one at a time.

If you order this at the same time as you order your door, we will install it for you at the factory and send the regular flaps (predrilled for ease of installation) in addition to your door.  As a standard, only one training flap is supplied with each order.  Typically, you would train the animal to use the single training flap, then switch it out for one of our regular flaps and finally attach the second regular flap on a double flap model.  If you prefer to have two training flaps sent with your door, please order an additional one from our parts page.

If you do not order a training flap with your initial door order but find that you need one at a later date, you can order them by visiting our replacement parts page. Please add 5% to the cost of the door for training flaps.