Screen Model

Flaps: Single flap made of flexible 3/16” clear PVC vinyl. 

Main Frame: Extruded 6063-T5 aluminum with .063” wall thickness.  Straddles the screen frame on outside and bottom.  Designed to accept frame thicknesses up to ½”.  Can be factory modified for thicker frames by removing the outside leg.

Spline Frame:  Extruded 6063-T5 aluminum with .063” wall thickness.  Attached to main frame and is the top and inner side of the pet door.

Alnico5 Magnets: A ¼” rod magnet 1 ½” long made from an aluminum, nickel and cobalt alloy known for its strength and durability. Door size determines number of magnets.

Strikes:  Made of ferrous stainless steel.  1 ½” long, ¾” tall and 1/32” thick.  U shaped with interior prongs, when squeezed onto the vinyl flap, the barbed prongs hold firmly.

Weather stripping:  Flap is surrounded by ½” nylon pile for maximum insulation. Nylon is woven into a backing 9/32” wide and 1/32” thick.