Omni Panel Model

PET DOOR SPECIFICATIONS:

Flaps: Double flaps (one flap on each frame) made of flexible 3/16" clear PVC vinyl.  

Inner Frame:  Inner frame made of two separate metal extrusions.  Three sides entrap the security cover.  Both extrusions are .063" wall thickness.

Outer Frame: Extruded 6063-T5 aluminum with .063" wall thickness.  Designed to sleeve into the inside frame.

Alnico5 Magnets: A 1/4" rod magnet 1 1/2" long made from an aluminum, nickel and cobalt alloy known for strength and durability. Door size determines number of magnets.

Strikes:  Made of ferrous stainless steel. 1 1/2" long, 3/4" tall and 1/32" thick.  U shaped with interior prongs, when pressed onto the vinyl flap, the barbed prongs hold firmly.

Weather-stripping:  Flap is surrounded by 1/2" black nylon pile for maximum insulation. Nylon is woven into a backing 9/32" wide and 1/32" thick.

Security Cover: Standard cover is 1/4" thick King Starboard® polymer sheet available in choice of opaque Black, opaque White, opaque Sanshade or opaque Dolphin Gray to coordinate with our four frame colors.   Extremely shock and impact resistant.  Has a 3/8" diameter locking hole.

Pin Lock: A 1/4" diameter positive action steel pin encased with 5/32" thick fabricated plated steel.

PANEL SPECIFICATIONS:

Jamb: Heavy 1/16” wall extruded aluminum 7/8” x 15/16”.  Inside of jamb holds the glass and vinyl weather stripping and outside has a channel to hold the pile weather stripping.
Adjusting Mechanism:  Two 4” x 5/16-18 pan head bolts and four 5/16-18 jam nuts.  The top two nuts hold the bolts tightly.  The bottom two nuts, when adjusted downward, effect an upward jackscrew type motion allowing the unit to be tightly secured without the use of screws.
Sliding Plate:  1/16” x 4 ½” tall plate on both the inner and outer sides of the adjustment area, color coordinated to frame color.  Plate can be lowered to make adjustment and raised to cover mechanism when adjustment is complete.
Omni Lock Bar:  Fits behind sliding glass door to prevent opening.
Glass:  Double pane insulated tempered glass.
Thermal Bond Rubber Seal: A packet of stiff weather-stripping used to line the edges of the adjustment area of the Omni mechanism.
Vinyl Weather stripping:  Unit also comes with extra length of 1 7/8” x 1/16” black vinyl weather stripping to attach to back edge of your patio door to prevent air leakage.