Door Model

Flaps: Double flaps (one flap on each door surface) made of flexible 3/16” clear PVC vinyl. 

Inner Frame:  Inner frame made of two separate metal extrusions.  Three sides entrap the security cover.  Both metals are .063” wall thickness.

Outer Frame: Extruded 6063-T5 aluminum with .063” wall thickness.  Designed to sleeve into the inside frame.

Flange:  The outer frame flange is .070” smaller than the inner frame flange to allow the frame to sleeve together.

Alnico5 Magnets: A ¼” rod magnet 1 ½” long made from an aluminum, nickel and cobalt alloy known for its strength and durability.  Door size determines number of magnets.

Strikes:  Made of ferrous stainless steel.  1 ½” long, ¾” tall and 1/32” thick.  U shaped with interior prongs, when squeezed onto the vinyl flap, the barbed prongs hold firmly.

Weather stripping:  Flap is surrounded by ½” nylon pile for maximum insulation. Nylon is woven into a backing 9/32” wide and 1/32” thick.

Security Cover: 1/4” thick King Starboard® polymer sheet.  Extremely shock and impact resistant.  Has a 3/8” diameter locking hole.

Cover Handle: A lightweight zinc alloy cabinet knob pull type handle in a satin nickel finish that is 25/32” wide, 19/32” tall and 53/64” deep with a 1/2” deep and 21/32” wide finger hole. It is attached to the cover with a 12 mm long zinc coated steel flat head Philips screw with a .70 thread size that is countersunk to prevent scratching the frame.

Pin Lock: A ¼” diameter positive action steel pin encased with 5/32” thick fabricated plated steel. 

Gap:  Standard range between door frames is from 1 9/32” to 2”.  A dimension larger than 2” would normally be considered a wall unit.  Can be factory modified to collapse to as small as ¾” gap.

Raincap: An optional awning like attachment that hooks to the outside frame for use in diverting water and preventing it from entering the pet door from above.