*Available in the lower 48 states, Ramps and Barriers excluded.
Vertical Omni Window Model
PET DOOR SPECIFICATIONS:
Flaps: Double flaps (one flap on each frame) made of flexible 3/16” clear PVC vinyl.
Inner Frame: Inner frame made of two separate metal extrusions. Three sides entrap the security cover. Both metals are .063” wall thickness.
Outer Frame: Extruded 6063-T5 aluminum with .063” wall thickness. Designed to sleeve into the inside frame.
Alnico5 Magnets: A ¼” rod magnet 1 ½” long made from an aluminum, nickel and cobalt alloy known for strength & durability. Door size determines number of magnets.
Strikes: Made of ferrous stainless steel. 1 ½” long, ¾” tall and 1/32” thick. U shaped with interior prongs, when squeezed onto the vinyl flap, the barbed prongs hold firmly.
Weather stripping: Flap is surrounded by ½” black nylon pile for maximum insulation. Nylon is woven into a backing 9/32” wide and 1/32” thick.
Security Cover: 1/4” thick King Starboard® polymer sheet. Extremely shock and impact resistant. Has a 3/8” diameter locking hole.
Cover Handle: A lightweight zinc alloy cabinet knob pull type handle in a satin nickel finish that is 25/32” wide, 19/32” tall and 53/64” deep with a 1/2” deep and 21/32” wide finger hole. It is attached to the cover with a 12 mm long zinc coated steel flat head Philips screw with a .70 thread size that is countersunk to prevent scratching the frame.
Pin Lock: A ¼” diameter positive action steel pin encased with 5/32” thick fabricated plated steel.
Frame: Designed to fit into a window track 7/8" or wider but can be factory modified to fit tracks as small as 1/2".
Adjusting Mechanism: Two 4" x 5/16-18" pan head bolts and four 5/16"-18" jam nuts. The top two nuts hold the bolts tightly. The bottom two nuts, when adjusted downward, effect an upward jackscrew type motion allowing the unit to be tightly secured within the window track without the use of screws.
Sliding Plate: 1/16" x 4 1/2" tall plate on both the inner and outer sides of the adjustment area, color coordinated to frame color. Plate can be lowered to make adjustment and raised to cover mechanism when adjustment is complete.
Omni Lock Bar: Fits behind sliding glass door to prevent opening. Manufactured to custom length for window width. The shortest effective lock bar length we can manufacture is 15".
Glass: Double pane 1/2" insulated tempered glass standard.
Pile Weather Stripping: Both side edges of window unit contain dense 5/16” gray nylon pile weather stripping. Nylon is woven into a .270 wide and 1/32” thick nylon backing.
No Metal Contact: Top and bottom edges are covered with 3/32" vinyl "booties" to provide cushioning and no metal to metal contact.
Vinyl Weather stripping: Unit also comes with extra length of 1 7/8” x 1/16” black vinyl weather stripping to attach to back edge of your window to prevent air leakage.